IP55 Water and Dust Resistant Performance as well as Industrys Top Large Air Flow
The 92 × 92 × 38 mm Splash Proof Fan "San Ace 92W"

SANYO DENKI CO., LTD. has developed the 92 × 92 × 38 mm splash proof fan "San Ace 92W", expanding the splash proof fan series lineup.
We have achieved IP55^*1 water and dust resistant performance, and industrys top large flow. ^*2
These products are suitable for mobiles communication base station or heat exchanger.
It has the PWM speed control function for external fan speed control.

Features

Splash proof and dust resistant

Protection class IP55^*1 water and dust resistant performance.
Maintains safe operation even in harsh environments.

Industrys top large air flow

Achieved industry’s top maximum air flow : 5.05 ｍ³/min. ^*2

Energy-saving and Low noise

Achieved energy-saving and low noise.
･Power consumption : 39.4 W
･Sound pressure level : 64 dB(A)

 

*1 “IP55”is a protection specification for protection against water sprays and dust.
It is based on IEC (International Electrotechnical Commission) and JIS (Japanese Industrial Standards) and specified as follows.
･Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact.
･Water projected in jets against the enclosure from any direction shall have no harmful effect.

*2 The information in this release is current as of October 8, 2010.
The above data is based on our own research, collected among same size fan for industrial use.

Specifications

PDF Catalog

Applications

mobiles communication base station or heat exchanger

Release Date

October 8, 2010

Projected sales figures

Initial fiscal year :1,000 units per month
Second fiscal year: 1,000 units per month

The information in this release is current as of October 8, 2010.

“ San Ace ” is a trademark of SANYO DENKI CO.,LTD.

Close this page

© SANYO DENKI CO.,LTD. All Rights Reserved.

Splash Proof Fan San Ace 92W Square type : 92mm Thick : 38mm The PDF file of this product can be downloaded. IP55 (Dust resistant, Machine protected aginst water jets) Features Material Frame: Plastics (Flammability: UL94V-0), Impeller:Plastics (Flammability: UL94V-1) Life Expectancy 30,000 h(Survival rate: 90% at 60º C, rated voltage,and continuously run in a free air state) Motor Protection System Current blocking function (with reverse polarity protection) Dielectric Strength ------------------------------------ Insulation Resistance 50/60 Hz, 500VAC, 1 minute (between lead conductor and frame) -------------------------------------------------------------------------------------------------------------- 10MΩ or more at 500VDC megger (between lead conductor and frame) Noise Measurement Method Measured at 1m from the air inlet Storage Temperature -------------------------------------- Operating Temprature -30ºC to +70ºC -------------------------------------------------------------------------------------------------------------- -10ºC to +70ºC(Non-condensing) Lead Wire (+): red (-): black Sensor: yellow Control: brown

Specifications Model No. Rated Voltage (V) Operating voltage range (V) Rated current (A) Rated input (W) Rated speed (min-1) Air flow (m3/min) Static pressure (Pa) Noise (dB[A]) Mass (g) 9WV0948P1H001 48 40.8 to 52.8 0.75 0.14 39.4 6.7 8,500 (PWM Duty 100%) 4,000 (PWM Duty 0%) 5.05 (178 CFM) 2.37 (83.7CFM) 385 (1.55inchH2O) 85.2 (0.34inchH2O) 64 45 265